It can pay for itself
ATOMIKAIR® is one of the few air-quality investments with a hard-dollar return. Two mechanisms drive it: reclaiming heat lost to stratification, and replacing disposable filters with washable media.
Destratification reclaims heat you already paid for
In a high-bay building, heated air rises and pools at the roofline while the floor — where people work — stays cold. Your heating system runs harder to compensate, warming space no one occupies.
Mix the column
Moving over a million cubic feet of air an hour, ATOMIKAIR continuously pulls warm air down off the ceiling back to floor level, evening out the temperature gradient.
Lower the heating load
With heat returned to where it’s needed, the facility’s heating system cycles less — a 20–40% reduction in heating cost for a typical high-bay space†.
Reverse it in summer
An optional cooling deflector redirects conditioned air down to floor level in warm months, so the same unit supports comfort and spend year-round.
Washable filters remove a recurring cost
A disposable-media system means a permanent replacement-filter line item and a steady waste stream. ATOMIKAIR is built to be cleaned, not consumed.
Five washable MERV-13 filters
Each unit runs five reusable MERV-13 filters (~13 lbs each) plus a permanent mist collector — washed and reinstalled on an annual cycle at 24/7 use.
No replacement-filter spend
Cleaning and reusing the media removes the recurring consumable cost that disposable systems carry for the life of the equipment.
Less waste to manage
Reusable filtration cuts the disposal stream and the handling that goes with swapping out spent media across a fleet of units.
Low operating cost over the unit’s life
Energy reclaimed plus consumables avoided keeps the operating cost low year after year. For many high-bay facilities, the destratification savings alone can recover the investment over time. Our team will model the numbers for your building.
† Based on a typical warehouse with a ~25-ft ceiling and ~10% occupancy. Actual coverage and heating-cost reduction will vary by facility.
Get the numbers for your building
Tell us your square footage, ceiling height, and current heating setup. Our industrial team will scope coverage and put together an ROI estimate specific to your facility.
